V-Type Slat Conveyor Belt-manufacture,factory,supplier from China

Technical specificationsV-type slat conveyor Chain pitch: P = 63.5 mm Slat width: B = 55 mm Slat length: L = 250 mm Thickness: S = 8mm,  Stainless steel, or carbon steel Length of conveyor Customized No.

Technical specificationsV-type slat conveyor Chain pitch: P = 63.5 mm Slat width: B = 55 mm Slat length: L = 250 mm Thickness: S = 8mm,  Stainless steel, or carbon steel Length of conveyor Customized No.

 Chain pitch: P = 63.5 mm Slat width: B = 55 mm Slat length: L = 250 mm Thickness: S = 8mm, 16 Mn Steel Conveyor height 12000mm*5 sets+17500mm*1 set Conveyor height 800mm Speed of conveyors 18m/min (Can be adjusted or as required) Slat bearing,Gear motor Chinese brand Power 3kW+4kW (or as required)chain conveyer, chain pitch P=63.5mm,V-slat width:B=50mm,slat length:B=250mm,Thickness:S=8 mm,Material 16 manganese.2. Slat are being made V type to transport paper rolls with a 170-degree angle.3.

Capacity of tissue machine8rolls/HBearing capacity:Max. 10tons (including spool shaft)Working time:24Hours /7 daysPaper roll diameter:φ1000-3500mmPaper roll width:±3700mmMax. Width including spool shaft:±5800mmTravel distance:±2*200m straight + 2*15m cross directionTravel speed:Max. 40m/min (loaded)Max. 60m/min (unloaded)Paper roll conveyor system--V-type slat conveyor1. The V type is especially made for the paper roll.2. The v-slat conveyor is usually used in the paper roll packing and transporting system.3.

Gram weight:100g/m2Moisture:7%Mechanical performance:Suitable for non-tear rolled edgeWrapping crimping distance:100mmFolding side width:100mm every sideTechnical information1. Chain conveyer, chain pitch P=63.5mm, V-slat width: B=50mm, slat length: B=250mm, Thickness: S=8 mm, Material 16 manganese.2. Slat are being made V type to transport paper rolls with a 170-degree angle.3. Slat conveyor weight capacity: 3000kg/m...4. Bearings in roller of conveyor chain for running flexible and being greased through the space of the chain roller. Not often and no pollution.5.

ItemSpecificationWrapping specifications(500-1300)mm*(500-1200)mm.Packing height2400mmPackaging efficiency20-40 loads/H available.

Technical specificationsV-type slat conveyor Chain pitch: P = 63.5 mm Slat width: B = 55 mm Slat length: L = 250 mm Thickness: S = 8mm,  Stainless steel, or carbon steel Length of conveyor Customized No.

V-slat conveyorChain pitch:P = 63.5 mmSlat width:B = 55 mmSlat length:L = 250 mmThickness:S = 8mm,  Stainless steel or Carbon steelLength of conveyorCustomizedNo. Of conveyorCustomizedSpeed of conveyors18m/min or customizedSlat bearing:HRB, ChinaGear motor:SEW, Germany or Chinese famous motorThe conveyor slat is made in V-Shaped, Angle: 170°.    --Loading capacity of slat conveyor: 3000 kg/m .--Chain rollers installed with bearing inside, No oil and No contamination on paper rolls.--Heavy duty steel structures, modular design.

Max load size(mm)1200 (L)×1200(W) ×2000(H)mmPacking efficiency0-60 loads / hourRotary arm speed0-25rpmPower supply4.0KW  380V 50HZ 3PhaseMax load capacity2000kgsWrapping requirementBottom wrapping up to 2/3 of pallet, top wrapping 15cm higher than the height of palletWorking ambianceIndoor, normal temperatureStop the finishing rolls coming from the rewinder and releaserolls to the V-type slat conveyor according in order.Change the gap conveying into the continuos conveying.

ItemsSpecificationsRoll Diameter600-1800mmRoll width500-2250mmRoll WeightMax.

 Feeding speed of the belt:  4.6m/sTension force, infinite regulation: 200-2500NHot melting sealing, length of sealing head: 27mmMaterial of belt: PET/PPWidth of belt:  9.5mm, 12.5mm,15.5mm Thickness of belt:   0.6-0.8mm The whole machine is equipped with automatic swords threading system.With the function of auto tape threading.The lifting of strapping heading is driven by gear motor SEW to ensure stable operation and reliable braking.With the strapping head of model VK10 K120-16 of TITAN Germany.

Product originShandong,ChinaSizeCustomizedDelivery time30daysSupply capacity1000sets/monthAuto Module Conveyor System is high efficient downstream and processing system for modern corrugated cardboard and carton box factory. Through the layout of the whole plant, a reasonable plan is designed to realize automatic cardboard conveying and reduce manpower and material resources

PP strap width9, 12, 15, 19mm, thickness 0.8mmPP strap splicing:electrical hot melt splicing,Splicing position580mm high above the conveyor. The pallet should not be less than 700mm in heightStrapper methodthe main machine move stroke is 400mm, mechanical sword strappingPlug between main control cabinet and wrapper for easier installation and maintenance.

Max load size(mm)1200 (L)×1200(W) ×2000(H)mmPacking efficiency0-60 loads / hourRotary arm speed0-25rpmPower supply4.0KW  380V 50HZ 3PhaseMax load capacity2000kgsWrapping requirementBottom wrapping up to 2/3 of pallet, top wrapping 15cm higher than the height of palletWorking ambianceIndoor, normal temperatureSimple and reliable design, stable workingAutomatic feeding, welding, cutting strap, make a flat and beautiful weldSide Motor drive moves on the two parallel rails, which keeps right strap position.One automatic wear sword slot can cross the center of turntable.

Capacity of tissue machine8rolls/HBearing capacity:Max. 10tons (including spool shaft)Working time:24Hours /7 daysPaper roll diameter:φ1000-3500mmPaper roll width:±3700mmMax. Width including spool shaft:±5800mmTravel distance:±2*200m straight + 2*15m cross directionTravel speed:Max. 40m/min (loaded)Max.

Chain pitchP = 63.5 mmSlat widthB = 55 mmSlat lengthL = 250 mmThicknessS = 8 mm  Stainless steel 304Turntable diameterDesign based on paper reel sizeThe photoelectric switch is installed on the film carriage, automatic detect the height of the pallet 

Capacity of tissue machine8rolls/HBearing capacity:Max. 10tons (including spool shaft)Working time:24Hours /7 daysPaper roll diameter:φ1000-3500mmPaper roll width:±3700mmMax. Width including spool shaft:±5800mmTravel distance:±2*200m straight + 2*15m cross directionTravel speed:Max. 40m/min (loaded)Max.

ModelT1650F Automatic pre-stretch film wrapping machineWrapping product sizeL(500-1200) mm × W(500-1200)mmWrapping heightL type:1800mm  H type:2400mm  Y type:2800mmPacking efficiency20-40 pallet/hRotary speed0~15rpm rotary speed, adjustable, steady start and stopTurntable sizeDia:1650mm  Height:78mmTurntable weight capacity2000kgsFilm carriage systemPre-stretch film carriage, pre-stretch up to 250%,automatic transport filmUp and down uprightDouble chain structure, adjustable up and down speed by transducerControl systemPLC programmableMachine weight700kgMachi

Max load size(mm)1200 (L)×1200(W)×1600(H)mmPacking efficiency20-40 loads / hourRotary arm speed3-15rpmHeight of turntable500mm±100mmPower supply380V 60HZ 3PhaseMax load capacity2000kgsWrapping requirementBottom wrapping up to 2/3 of pallet, top wrapping 15cm higher than the height of palletWorking ambianceIndoor, normal temperatureTurntableDiameter: 2000mmMast heightAccording to the pallet and turntable heightFilm carriagePowered pre-stretch system up to 300% to min film consumption(Prestretch ratio can be specially made)Carriage door opens for effortless roll change and thread filmFilm delive

ModelT1650F Automatic pre-stretch film wrapping machineWrapping product sizeL(500-1200) mm × W(500-1200)mmWrapping heightL type:1800mm  H type:2400mm  Y type:2800mmPacking efficiency20-40 pallet/hRotary speed0~15rpm rotary speed, adjustable, steady start and stopTurntable sizeDia:1650mm  Height:78mmTurntable weight capacity2000kgsFilm carriage systemPre-stretch film carriage, pre-stretch up to 250%,automatic transport filmUp and down uprightDouble chain structure, adjustable up and down speed by transducerControl systemPLC programmableMachine weight700kgMachi

Material:  stretch filmWidth:      500mmThickness:     17-35μmInner Core:       76.2mmOuter-Dia.:      ≤260 mmOpen-door type pre-stretch film carriage, stretch ratio 250% (1m to 3.5m)Film carriage lifting driving: chain driving, good stability and high reliability Driving reducer: worm gear reducer; Motor power: 0.75kw, SEW

Product ParametersFrame material:carbon steel sheetSmall roller chain material:08B carbon steelRail material:steel rail.Sprocket material:steel matching standard sprocket (tooth surface quenching).Chain Tension:bearing housing tensionRoller material:60 carbon steel galvanized thickened roller,Conveyor line outer width/effective inner width:1450mm/1260mm (customized size according to cargo specifications)  The conveying mechanism can adopt different forms such as rollers, belts, chain plates, etc.

1. The main frame, four robust columns connected by a solid construction consisting ofHeavy square cartridge profile, fully sprayed in RAL colour and designed for the most stable suspension of the swivel arm;2. Swivel arm from heavy cartridge profile fitted with external cabling for vertical movement of the slide which the foil trolley is suspended from. This slide is suspended from a chain and powered by a transmission motor. Fitted with frequency control3. · Automatic height sensor of the pallet load through a photo cell which is also able toDetect dark loads;4.