Slat Conveyor-manufacture,factory,supplier from China

(Total 24 Products for Slat Conveyor)
Technical specificationsV-type slat conveyor Chain pitch: P = 63.5 mm Slat width: B = 55 mm Slat length: L = 250 mm Thickness: S = 8mm,  Stainless steel, or carbon steel Length of conveyor Customized No.
  Contact Now
Technical specificationsV-type slat conveyor Chain pitch: P = 63.5 mm Slat width: B = 55 mm Slat length: L = 250 mm Thickness: S = 8mm,  Stainless steel, or carbon steel Length of conveyor Customized No.
  Contact Now
Technical specificationsV-type slat conveyor Chain pitch: P = 63.5 mm Slat width: B = 55 mm Slat length: L = 250 mm Thickness: S = 8mm,  Stainless steel, or carbon steel Length of conveyor Customized No.
  Contact Now
V-slat conveyorChain pitch:P = 63.5 mmSlat width:B = 55 mmSlat length:L = 250 mmThickness:S = 8mm,  Stainless steel or Carbon steelLength of conveyorCustomizedNo. Of conveyorCustomizedSpeed of conveyors18m/min or customizedSlat bearing:HRB, ChinaGear motor:SEW, Germany or Chinese famous motorThe conveyor slat is made in V-Shaped, Angle: 170°.    --Loading capacity of slat conveyor: 3000 kg/m .--Chain rollers installed with bearing inside, No oil and No contamination on paper rolls.--Heavy duty steel structures, modular design.
  Contact Now
 Chain pitch: P = 63.5 mm Slat width: B = 55 mm Slat length: L = 250 mm Thickness: S = 8mm, 16 Mn Steel Conveyor height 12000mm*5 sets+17500mm*1 set Conveyor height 800mm Speed of conveyors 18m/min (Can be adjusted or as required) Slat bearing,Gear motor Chinese brand Power 3kW+4kW (or as required)chain conveyer, chain pitch P=63.5mm,V-slat width:B=50mm,slat length:B=250mm,Thickness:S=8 mm,Material 16 manganese.2. Slat are being made V type to transport paper rolls with a 170-degree angle.3.
  Contact Now
Capacity of tissue machine8rolls/HBearing capacity:Max. 10tons (including spool shaft)Working time:24Hours /7 daysPaper roll diameter:φ1000-3500mmPaper roll width:±3700mmMax. Width including spool shaft:±5800mmTravel distance:±2*200m straight + 2*15m cross directionTravel speed:Max. 40m/min (loaded)Max. 60m/min (unloaded)Paper roll conveyor system--V-type slat conveyor1. The V type is especially made for the paper roll.2. The v-slat conveyor is usually used in the paper roll packing and transporting system.3.
  Contact Now
Gram weight:100g/m2Moisture:7%Mechanical performance:Suitable for non-tear rolled edgeWrapping crimping distance:100mmFolding side width:100mm every sideTechnical information1. Chain conveyer, chain pitch P=63.5mm, V-slat width: B=50mm, slat length: B=250mm, Thickness: S=8 mm, Material 16 manganese.2. Slat are being made V type to transport paper rolls with a 170-degree angle.3. Slat conveyor weight capacity: 3000kg/m...4. Bearings in roller of conveyor chain for running flexible and being greased through the space of the chain roller. Not often and no pollution.5.
  Contact Now
Max load size(mm)1200 (L)×1200(W) ×2000(H)mmPacking efficiency0-60 loads / hourRotary arm speed0-25rpmPower supply4.0KW  380V 50HZ 3PhaseMax load capacity2000kgsWrapping requirementBottom wrapping up to 2/3 of pallet, top wrapping 15cm higher than the height of palletWorking ambianceIndoor, normal temperatureStop the finishing rolls coming from the rewinder and releaserolls to the V-type slat conveyor according in order.Change the gap conveying into the continuos conveying.
  Contact Now
Product originShandong,ChinaSizeCustomizedDelivery time30daysSupply capacity1000sets/monthAuto Module Conveyor System is high efficient downstream and processing system for modern corrugated cardboard and carton box factory. Through the layout of the whole plant, a reasonable plan is designed to realize automatic cardboard conveying and reduce manpower and material resources
  Contact Now
Chain pitchP = 63.5 mmSlat widthB = 55 mmSlat lengthL = 250 mmThicknessS = 8 mm  Stainless steel 304Turntable diameterDesign based on paper reel sizeThe photoelectric switch is installed on the film carriage, automatic detect the height of the pallet 
  Contact Now
Product ParametersFrame material:carbon steel sheetSmall roller chain material:08B carbon steelRail material:steel rail.Sprocket material:steel matching standard sprocket (tooth surface quenching).Chain Tension:bearing housing tensionRoller material:60 carbon steel galvanized thickened roller,Conveyor line outer width/effective inner width:1450mm/1260mm (customized size according to cargo specifications)  The conveying mechanism can adopt different forms such as rollers, belts, chain plates, etc.
  Contact Now
Capacity of tissue machine8rolls/HBearing capacity:Max. 10tons (including spool shaft)Working time:24Hours /7 daysPaper roll diameter:φ1000-3500mmPaper roll width:±3700mmMax. Width including spool shaft:±5800mmTravel distance:±2*200m straight + 2*15m cross directionTravel speed:Max. 40m/min (loaded)Max.
  Contact Now
Capacity of tissue machine8rolls/HBearing capacity:Max. 10tons (including spool shaft)Working time:24Hours /7 daysPaper roll diameter:φ1000-3500mmPaper roll width:±3700mmMax. Width including spool shaft:±5800mmTravel distance:±2*200m straight + 2*15m cross directionTravel speed:Max. 40m/min (loaded)Max.
  Contact Now
1. The main frame, four robust columns connected by a solid construction consisting ofHeavy square cartridge profile, fully sprayed in RAL colour and designed for the most stable suspension of the swivel arm;2. Swivel arm from heavy cartridge profile fitted with external cabling for vertical movement of the slide which the foil trolley is suspended from. This slide is suspended from a chain and powered by a transmission motor. Fitted with frequency control3. · Automatic height sensor of the pallet load through a photo cell which is also able toDetect dark loads;4.
  Contact Now
1.  Wrapping size500-1200mm (L) *500-1200mm (W)2.  Packaging heightMax.2400mm (1800/2800mm availiable)3.  Work efficiency20-40 loads/H4.  Turntable speed0-15RPM (adjustable, soft start & stop)5.  BearingMax. 2000kgs6.  Turntable sizeD=1650mm, H=78mm7.  Film carriageDriven pre-stretch carriage,stretch ratio up to 300%8.  TowerDouble chain design. Lifting speed adjustable 9.  Control systemPLC10. Weight600kgs11. Dimension2745mm*1650mm*2860mm12.
  Contact Now
Capacity of tissue machine8rolls/HBearing capacity:Max. 10tons (including spool shaft)Working time:24Hours /7 daysPaper roll diameter:φ1000-3500mmPaper roll width:±3700mmMax. Width including spool shaft:±5800mmTravel distance:±2*200m straight + 2*15m cross directionTravel speed:Max. 40m/min (loaded)Max.
  Contact Now
Control systemPLC control systemPhoto eye pallet height sensor3-12 RPM variable turntable speed by frequency changerTurntableGo home position after wrap cycle finishedSoft start/soft stopHeavy duty chain driveFilm carriagePowered pre-stretch system to 300% to min film consumptionFilm delivery barlable speed by spparate AC Drive MotorHeavy duty double-chain carriage lift, calm and safetyTechnology DataMax load size(mm): 1200(L)X1200(W)X2400(H)Turntable dia: 1650mmTurntable Height: 77mmTurntable weight capacity: 2000kgsTurntable speed: 3-12rpmElectrics: 220V  50HZ 1 phasePower: 1.5KWPacking
  Contact Now
PP strap width9, 12, 15, 19mm, thickness 0.8mmPP strap splicing:electrical hot melt splicing,Splicing position580mm high above the conveyor. The pallet should not be less than 700mm in heightStrapper methodthe main machine move stroke is 400mm, mechanical sword strappingPlug between main control cabinet and wrapper for easier installation and maintenance.
  Contact Now
ItemData Rotating ring inner diameter1800mm Package dimension (W*H)100 mm*1200 mm Packing length>1200 mm Rotating ring speed20-30rpm Conveying speed5-8 m/min Packing material width 200 mm- 500 mm Power 2.2 Kw Machine Weight 1500 kg Machine shape size 2600 mm * 1650 mm *2600 mmFeatures: Siemens PLC electric control system, touch screen panelRing rotating speed controlled by the inverterIn-feed & out-feed conveyor speed controlled by the inverterStart and finish cycles are controlled by photocellsAuto film cutting and c
  Contact Now
Rotating ring inner diameter1200-2000mmWrapping dimensionWidth: 500-1100mm; Height: 500-1000mm; Length: 500-2000mmRotating ring speedMax.
  Contact Now
Technical SpecificationItemsSpecificationsWrapping sizeDiameter (200-600mm);Width (200-500mm)Packing efficiency20-40 rolls/hourTurntable speed0-12 rpmFilm carriagePower pre-stretch film carriagePre-stretch ratio1:2.5 or customizedTurntable height700mmTurntable capacity80kgPower supplyAC 220V/ 60Hz/ 1Phase, 0.8kwMachine size (L*W*H)1460mm*840mm*1492mmMachine weight200kgs2017.3 Shandong Sinolion Machienry Corp. Ltd start expanding the new plant.2015.9 Shandong Sinolion Machinery Corp.
  Contact Now
ItemSpecificationwrapping size(mm)500-1200mm (L)×500-1100(W)Wrapping height (mm)2200mmPacking efficiency20-40 loads / hourTurntable turning speed0-15rpm (Adjustable, soft start&stop)Roller conveying speed:20mpm adjustableTurntable diameter1800mmHeight of turntableTo be designed based on customer requirementsPower supply2.4KW   380V 50HZ 3PhaseMax.
  Contact Now
Control systemPLC control systemPhoto eye pallet height sensor3-12 RPM variable turntable speed by frequency changerTurntableGo home position after wrap cycle finishedSoft start/soft stopHeavy duty chain driveFilm carriagePowered pre-stretch system to 300% to min film consumptionFilm delivery barlable speed by spparate AC Drive MotorHeavy duty double-chain carriage lift, calm and safetyTechnology DataMax load size(mm): 1200(L)X1200(W)X2400(H)Turntable dia: 1650mmTurntable Height: 77mmTurntable weight capacity: 2000kgsTurntable speed: 3-12rpmElectrics: 220V  50HZ 1 phasePower: 1.5KWWe Offe
  Contact Now
Relate News
Sinolion Machinery promoted high speed ring Wrapping Machine on SIAF 2019, March 10-12.The automatic Ring Wrapper is designed for high speed wrapping solution,with rotating ring moving up and down with auto film cutter. The wrapper has compact structure and the wrapping can be more flexible.Please come to Sinolion for more information.
Sinolion is going to attend Paper Indonesia 2019We invite you to visit the exhibition Paper Indonesia 2019", which will be held August 28-30, 2019 in Jakarta, Indonesia. You will find us at BOOTH: B333.Sinolion Machinery had started produce reel Wrapping Machine and handling machines since 1998, and now become the profession reel handling system supplier in China.We keep innovative in packaging system developement. You are welcomed to contact us for customized Packaging Solution.
The law back to the spring sunshine gradually, all the elephants began to renew!In order to adapt to the rapid development of the enterprise, promote the staff to learn the basic knowledge and basic theory of the company's products, grasp the future direction of the company's market, improve marketing skills, at the same time, to create a full marketing, common growth of learning team, 2023 annual deep blue machine start-up training was held on January 29 in the fourth floor of the office building in the large conference room.The meeting was firstly opened by the general manager Li Mei
On May 8, Jinan High-tech Zone released the selection list of the first batch of "High-tech Excellent Products" and the first "High-tech Excellent Products" brand conference was held in Jinan High-tech Zone. Ltd. was selected as one of the first batch of "High-tech Excellent Products" enterprises, and won the "High-tech Excellent Products" award with its "Intelligent Production Line Automation Packaging Equipment".
In order to actively explore the mode of joint cultivation of innovative and practical talents by schools and enterprises; to help college students to be educated, grow and contribute in practice; and to cultivate high-quality, innovative and application-oriented talents, Qilu Institute of Technology and Shandong Shenlan Machinery Co.
Headquartered in Jinan, China, it is a high-tech enterprise focusing on production line logistics automation solutions under Binglun Environment (stock code 000811). The company has a production plant and office building with an area of 30,000 square meters, more than 260 employees, and more than 70 professional technical research and development personnel.
The sixth meeting of the third session of the Board of Directors of Shandong Shenlan Machinery Co., Ltd. was held at 14:30 p.m. on March 14, 2023 in the large conference room of the Company. There were 5 directors who should attend the meeting and 5 directors who actually attended the meeting, which was in accordance with the relevant provisions of the Company Law and the Articles of Association.