Paper Roller Handling Line-manufacture,factory,supplier from China

ItemSpecificationWrapping specifications(500-1300)mm*(500-1200)mm.Packing height2400mmPackaging efficiency20-40 loads/H available.

                                          ItemSpecificationWrapping specifications(500-1300)mm*(500-1200)mm.Packing height2400mmPackaging efficiency30-60 loads/H available.

Max load size(mm)1200 (L)×1200(W) ×2000(H)mmPacking efficiency0-60 loads / hourRotary arm speed0-25rpmPower supply4.0KW  380V 50HZ 3PhaseMax load capacity2000kgsWrapping requirementBottom wrapping up to 2/3 of pallet, top wrapping 15cm higher than the height of palletWorking ambianceIndoor, normal temperatureStop the finishing rolls coming from the rewinder and releaserolls to the V-type slat conveyor according in order.Change the gap conveying into the continuos conveying.

 Chain pitch: P = 63.5 mm Slat width: B = 55 mm Slat length: L = 250 mm Thickness: S = 8mm, 16 Mn Steel Conveyor height 12000mm*5 sets+17500mm*1 set Conveyor height 800mm Speed of conveyors 18m/min (Can be adjusted or as required) Slat bearing,Gear motor Chinese brand Power 3kW+4kW (or as required)chain conveyer, chain pitch P=63.5mm,V-slat width:B=50mm,slat length:B=250mm,Thickness:S=8 mm,Material 16 manganese.2. Slat are being made V type to transport paper rolls with a 170-degree angle.3.

Product ParametersFrame material:carbon steel sheetSmall roller chain material:08B carbon steelRail material:steel rail.Sprocket material:steel matching standard sprocket (tooth surface quenching).Chain Tension:bearing housing tensionRoller material:60 carbon steel galvanized thickened roller,Conveyor line outer width/effective inner width:1450mm/1260mm (customized size according to cargo specifications)  The conveying mechanism can adopt different forms such as rollers, belts, chain plates, etc.

ItemSpecificationwrapping size(mm)500-1300mm (L)×500-1200(W)Wrapping height (mm)2200mmPacking efficiency20-40 loads / hourTurntable turning speed0-15rpm (Adjustable, soft start&stop)Roller conveying speed:18mpm adjustableTurntable diameter2000mmHeight of turntableTo be designed based on customer requirementsPower supply2.0KW   380V 50HZ 3PhaseMax.

Gram weight:100g/m2Moisture:7%Mechanical performance:Suitable for non-tear rolled edgeWrapping crimping distance:100mmFolding side width:100mm every sideTechnical information1. Chain conveyer, chain pitch P=63.5mm, V-slat width: B=50mm, slat length: B=250mm, Thickness: S=8 mm, Material 16 manganese.2. Slat are being made V type to transport paper rolls with a 170-degree angle.3. Slat conveyor weight capacity: 3000kg/m...4. Bearings in roller of conveyor chain for running flexible and being greased through the space of the chain roller. Not often and no pollution.5.

Package length≤2200mmPackage diameter400mmCross section of goods(W×H)550X550mmPackaging speed4-6m/minPackaging efficiency40-60s/pieceOperation voltage380V.50HzMain engine power3.5KWPackaging material materialStretch film, anti rust composite paper, woven tape, aluminum plastic film, etcPacking material inner diameterΦ38,Φ50,Φ75Outer diameter of packaging materialsΦ150-Φ600Packaging material width50-120mmSwivel travelThe lifting stroke is 250mm; Horizontal movement 400mmAutomatic winding mechanism /ZSPneumatic controlPneumatic roof pressure /CSOptionalPneumatic roller protector /HGOptionalConve

ItemSpecificationWrapping specifications(500-1300)mm*(500-1200)mm.Packing height2400mmPackaging efficiency30-60 loads/H available. (Option: or 20-40 loads/H)Arm speed0-25rpm frequency control.

Voltage220/380V 50/60HZ 3PWrapping Size(L*W mm)(500-1100)*(500-1200)Wrapping Height500-1800/2400Capacity20-40 Pallet/HourTurntable size2000mmTurntable Height400mmIntelligent Conveying and Packaging System Paper Roll Conveying and Packaging System in Papermaking Completion Section. Paper roll conveying and packaging system is mainly used for paper roll conveying and packaging in paper mills. Use special machinery and advanced control system to complete automatic and manual conveying, stopping, turning, weighing, code spraying, labeling, turning and packaging of paper rolls.

Rotating speed of the rotary arm:0-35rpm, variable frequency control motor drivingFunction of rotary arm:automatic brake system, automatic resetFilm carriage:pre-stretch film carriagethe stretch ratio up to 250%automatic stretch film feedingFilm lifting guide rail: double chain structure, the lifting speed adjustableControl system: PLC control system, wrapping layers and times adjustableAutomatic height detection of the goodsAuto film feeding:                 pneumatic driving, auto film feeding, aut

ItemSpecificationFilm carriageDriven pre-stretch carriage, move up and down on side of the towerTowerDouble chain design. Lifting speed adjustableControl systemPLCRemarks: Some parts of the machine can be exchanged according to customer requirements.Option I: Standard low profile ramp.Option II: Weight scaleKickerKick out the rolls to the required position or equipments.

Capacity of tissue machine8rolls/HBearing capacity:Max. 10tons (including spool shaft)Working time:24Hours /7 daysPaper roll diameter:φ1000-3500mmPaper roll width:±3700mmMax. Width including spool shaft:±5800mmTravel distance:±2*200m straight + 2*15m cross directionTravel speed:Max. 40m/min (loaded)Max. 60m/min (unloaded)Paper roll conveyor system--V-type slat conveyor1. The V type is especially made for the paper roll.2. The v-slat conveyor is usually used in the paper roll packing and transporting system.3.

Gram weight:100g/m2Moisture:7%Mechanical performance:Suitable for non-tear rolled edgeWrapping crimping distance:100mmFolding side width:100mm every sideMain material of the frame: Q235-AThe surface of the 7 paper guide rollers is galvanized with a diameter of Ф100mm.4 sets of tension controller, using motor frequency control.4 sets of paper holder pneumatic clamping mechanism, including 8 cylinders.4 pneumatic control boxes and pneumatic control components used.Compressed air lines, fittings and accessories used inside the packaging machine.The gas point is connected to the gas point by the b

Chain pitchP = 63.5 mmSlat widthB = 55 mmSlat lengthL = 250 mmThicknessS = 8 mm  Stainless steel 304Turntable diameterDesign based on paper reel sizeThe photoelectric switch is installed on the film carriage, automatic detect the height of the pallet 

Technical specifications：Machine size:L5530×W2645×H3900 (mm)(max)Work efficiency:30 loads/H (wrapping and top-sheeting)Rotary speed: 15rpm Power supply:380Vac/3phases/50Hz, Air supply:0.5-0.6Mpa,Rotary arm stop by safety bumper and reflection photo eye sensing and obstacle in the rotating area.Powered pre-stretch system up to 250% to min film consumptionLifting unit in wrapping field will lift pallet up to 150mm above the roller conveyorFull auto feeding film and cutting film

1.  Wrapping size500-1200mm (L) *500-1200mm (W)2.  Packaging heightMax.2400mm (1800/2800mm availiable)3.  Work efficiency20-40 loads/H4.  Turntable speed0-15RPM (adjustable, soft start & stop)5.  BearingMax. 2000kgs6.  Turntable sizeD=1650mm, H=78mm7.  Film carriageDriven pre-stretch carriage,stretch ratio up to 300%8.  TowerDouble chain design. Lifting speed adjustable 9.  Control systemPLC10. Weight600kgs11. Dimension2745mm*1650mm*2860mm12.

Palletizing speed400-1200 bags/hourLayers  1-10 layersAir supply 0.5-0.8 MpaPower supply380V/220V     50HZ+_10%Weight capacity(including mould)180-250kgRobtic palletizing and wrapping systems integrates palletzing, strapping, conveying and wrapping into automatic packing line with robot technology. It is widely applied in the industry of chemical , beverage,beer and other industries.It features with energy saving and high efficiency.

V-slat conveyorChain pitch:P = 63.5 mmSlat width:B = 55 mmSlat length:L = 250 mmThickness:S = 8mm,  Stainless steel or Carbon steelLength of conveyorCustomizedNo. Of conveyorCustomizedSpeed of conveyors18m/min or customizedSlat bearing:HRB, ChinaGear motor:SEW, Germany or Chinese famous motorThe conveyor slat is made in V-Shaped, Angle: 170°.    --Loading capacity of slat conveyor: 3000 kg/m .--Chain rollers installed with bearing inside, No oil and No contamination on paper rolls.--Heavy duty steel structures, modular design.

 Technical specifications ItemSpecificationwrapping size(mm)500-1200mm (L)×500-1200(W)Wrapping height (mm)2200mmPacking efficiency20-40 loads / hourTurntable turning speed0-15rpm (Adjustable, soft start&stop)Roller conveying speed:20mpm adjustableTurntable diameter1800mmHeight of turntableTo be designed based on customer requirementsPower supply2.0KW   380V 50HZ 3PhaseMax.

Chain pitchP = 63.5 mmSlat widthB = 55 mmSlat lengthL = 250 mmThicknessS = 8 mm  Stainless steel 304Turntable diameterDesign based on paper reel sizeAfter finishing stretch wrapping, the film tail will be cut and next film head is clamped automatically. Air blowing to wrap film head into pallet.Hot cutting wire to cut the film after wrapping, and then wiper arm brush against film tail.

Turntable Diameter1650 mmWrapping Height Max.2500 mmLoad Capacity2000 kgEfficiency20 - 40 loads/hTurntable Height85 mmTurntable Speed0 - 12 rpm, variablePre-StretchPowered Roller Pre-Stretch System Up to 250 - 300%Voltage220 VAC 1 ph 50/60 HzPower1.55 kwMachine SizeL 2550 mm × W 1650 mm × H 2485 mmMachine Weight600 kgTurntable Diameter 1650 mm;Turntable Rotation Speed 0 - 12 RPM, Varibale;Load Capacity 2000 kg;Soft Start and Stop, Always Stopped at the Same Home Position;With Forklift Slots Allow for Easy Re-location from Either Side;Apply to Max.

ItemSpecificationwrapping size(mm)500-1200mm (L)×500-1100(W)Wrapping height (mm)2200mmPacking efficiency20-40 loads / hourTurntable turning speed0-15rpm (Adjustable, soft start&stop)Roller conveying speed:20mpm adjustableTurntable diameter1800mmHeight of turntableTo be designed based on customer requirementsPower supply2.4KW   380V 50HZ 3PhaseMax.