Paper Roll Reel Packing Line-manufacture,factory,supplier from China

Rotating speed of the rotary arm:0-35rpm, variable frequency control motor drivingFunction of rotary arm:automatic brake system, automatic resetFilm carriage:pre-stretch film carriagethe stretch ratio up to 250%automatic stretch film feedingFilm lifting guide rail: double chain structure, the lifting speed adjustableControl system: PLC control system, wrapping layers and times adjustableAutomatic height detection of the goodsAuto film feeding:                 pneumatic driving, auto film feeding, aut

Voltage220/380V 50/60HZ 3PWrapping Size(L*W mm)(500-1100)*(500-1200)Wrapping Height500-1800/2400Capacity20-40 Pallet/HourTurntable size2000mmTurntable Height400mmIntelligent Conveying and Packaging System Paper Roll Conveying and Packaging System in Papermaking Completion Section. Paper roll conveying and packaging system is mainly used for paper roll conveying and packaging in paper mills. Use special machinery and advanced control system to complete automatic and manual conveying, stopping, turning, weighing, code spraying, labeling, turning and packaging of paper rolls.

Chain pitchP = 63.5 mmSlat widthB = 55 mmSlat lengthL = 250 mmThicknessS = 8 mm  Stainless steel 304Turntable diameterDesign based on paper reel sizeThe photoelectric switch is installed on the film carriage, automatic detect the height of the pallet 

Capacity of tissue machine8rolls/HBearing capacity:Max. 10tons (including spool shaft)Working time:24Hours /7 daysPaper roll diameter:φ1000-3500mmPaper roll width:±3700mmMax. Width including spool shaft:±5800mmTravel distance:±2*200m straight + 2*15m cross directionTravel speed:Max. 40m/min (loaded)Max. 60m/min (unloaded)Paper roll conveyor system--V-type slat conveyor1. The V type is especially made for the paper roll.2. The v-slat conveyor is usually used in the paper roll packing and transporting system.3.

                                          ItemSpecificationWrapping specifications(500-1300)mm*(500-1200)mm.Packing height2400mmPackaging efficiency30-60 loads/H available.

ItemSpecificationFilm carriageDriven pre-stretch carriage, move up and down on side of the towerTowerDouble chain design. Lifting speed adjustableControl systemPLCRemarks: Some parts of the machine can be exchanged according to customer requirements.Option I: Standard low profile ramp.Option II: Weight scaleKickerKick out the rolls to the required position or equipments.

Palletizing speed400-1200 bags/hourLayers  1-10 layersAir supply 0.5-0.8 MpaPower supply380V/220V     50HZ+_10%Weight capacity(including mould)180-250kgRobtic palletizing and wrapping systems integrates palletzing, strapping, conveying and wrapping into automatic packing line with robot technology. It is widely applied in the industry of chemical , beverage,beer and other industries.It features with energy saving and high efficiency.

ItemsSpecificationsRoll Diameter600-3000mmRoll width500-1800mmRoll WeightMax. 3000kgsPacking efficiency20-30 rolls/hTurntable diameter2200mmTurntable speed3-12rpmTurntable height490mm/710mmMachine weight1180kgPower supply2.2kw, 220V, 1P, 50 Hz Reel Wrapping Machine is the cylindrical winding packaging machine for cylindrical objects to carry out axial packaging to achieve the overall package. The wrapper wraps reel in 360 degree and can be designed with top platen device.

Material:  stretch filmWidth:      500mmThickness:     17-35μmInner Core:       76.2mmOuter-Dia.:      ≤260 mmOpen-door type pre-stretch film carriage, stretch ratio 250% (1m to 3.5m)Film carriage lifting driving: chain driving, good stability and high reliability Driving reducer: worm gear reducer; Motor power: 0.75kw, SEW

Capacity of tissue machine8rolls/HBearing capacity:Max. 10tons (including spool shaft)Working time:24Hours /7 daysPaper roll diameter:φ1000-3500mmPaper roll width:±3700mmMax. Width including spool shaft:±5800mmTravel distance:±2*200m straight + 2*15m cross directionTravel speed:Max. 40m/min (loaded)Max.

Capacity of tissue machine8rolls/HBearing capacity:Max. 10tons (including spool shaft)Working time:24Hours /7 daysPaper roll diameter:φ1000-3500mmPaper roll width:±3700mmMax. Width including spool shaft:±5800mmTravel distance:±2*200m straight + 2*15m cross directionTravel speed:Max. 40m/min (loaded)Max.

V-slat conveyorChain pitch:P = 63.5 mmSlat width:B = 55 mmSlat length:L = 250 mmThickness:S = 8mm,  Stainless steel or Carbon steelLength of conveyorCustomizedNo. Of conveyorCustomizedSpeed of conveyors18m/min or customizedSlat bearing:HRB, ChinaGear motor:SEW, Germany or Chinese famous motorThe conveyor slat is made in V-Shaped, Angle: 170°.    --Loading capacity of slat conveyor: 3000 kg/m .--Chain rollers installed with bearing inside, No oil and No contamination on paper rolls.--Heavy duty steel structures, modular design.

ItemsSpecificationsRoll Diameter600-1500mmRoll width500-1600mmRoll WeightMax. 2000kgsPacking efficiency20-30 rolls/hTurntable diameter2000mmTurntable speed3-12rpmTurntable height490mm/710mmMachine weight1080kgPower supply2.2kw, 220V, 1P, 50 HzMachine dimension2895(L) ×2000(W) ×2300(H) mmOption:Auto eject the reel after wrapping progressTop platen device;Slewing bearing can be equipped with.Is conducive to the storage, transport and turnover of goods, with dust, moisture, cleaning the role of. Its packaging cost low, high efficiency, improve the level of packaging.

Max load size(mm)1200 (L)×1200(W) ×2000(H)mmPacking efficiency0-60 loads / hourRotary arm speed0-25rpmPower supply4.0KW  380V 50HZ 3PhaseMax load capacity2000kgsWrapping requirementBottom wrapping up to 2/3 of pallet, top wrapping 15cm higher than the height of palletWorking ambianceIndoor, normal temperatureStop the finishing rolls coming from the rewinder and releaserolls to the V-type slat conveyor according in order.Change the gap conveying into the continuos conveying.

Chain pitchP = 63.5 mmSlat widthB = 55 mmSlat lengthL = 250 mmThicknessS = 8 mm  Stainless steel 304Turntable diameterDesign based on paper reel sizeAfter finishing stretch wrapping, the film tail will be cut and next film head is clamped automatically. Air blowing to wrap film head into pallet.Hot cutting wire to cut the film after wrapping, and then wiper arm brush against film tail.

Technical SpecificationItemsSpecificationsWrapping sizeDiameter (200-600mm);Width (200-500mm)Packing efficiency20-40 rolls/hourTurntable speed0-12 rpmFilm carriagePower pre-stretch film carriagePre-stretch ratio1:2.5 or customizedTurntable height700mmTurntable capacity80kgPower supplyAC 220V/ 60Hz/ 1Phase, 0.8kwMachine size (L*W*H)1460mm*840mm*1492mmMachine weight200kgs2017.3 Shandong Sinolion Machienry Corp. Ltd start expanding the new plant.2015.9 Shandong Sinolion Machinery Corp.

ItemsSpecificationsRoll Diameter600-1800mmRoll width500-2250mmRoll WeightMax.

Packing Size Max.W 500 - 1200 mm × L 500 - 1200 mmTurntable Diameter1650 mmWrapping Height Max.2500 mmLoad Capacity2000 kgEfficiency20 - 40 loads/hTurntable Height85 mmTurntable Speed0 - 12 rpm, variablePre-StretchPowered Roller Pre-Stretch System Up to 250 - 300%Stretch FilmLLDPE Stretch Film in 500 mm width × 15 - 35 um thickness; Film Reel in 76 mm core diameter × Max.

Gram weight:100g/m2Moisture:7%Mechanical performance:Suitable for non-tear rolled edgeWrapping crimping distance:100mmFolding side width:100mm every sideMain material of the frame: Q235-AThe surface of the 7 paper guide rollers is galvanized with a diameter of Ф100mm.4 sets of tension controller, using motor frequency control.4 sets of paper holder pneumatic clamping mechanism, including 8 cylinders.4 pneumatic control boxes and pneumatic control components used.Compressed air lines, fittings and accessories used inside the packaging machine.The gas point is connected to the gas point by the b

Capacity of tissue machine8rolls/HBearing capacity:Max. 10tons (including spool shaft)Working time:24Hours /7 daysPaper roll diameter:φ1000-3500mmPaper roll width:±3700mmMax. Width including spool shaft:±5800mmTravel distance:±2*200m straight + 2*15m cross directionTravel speed:Max. 40m/min (loaded)Max.

Technical specificationsV-type slat conveyor Chain pitch: P = 63.5 mm Slat width: B = 55 mm Slat length: L = 250 mm Thickness: S = 8mm,  Stainless steel, or carbon steel Length of conveyor Customized No.

Wrapping speed:30-60pallets/hRotating speed of the rotary arm:0-35rpm, variable frequency control motor drivingFunction of rotary arm:automatic brake system, automatic resetFilm carriage:pre-stretch film carriagethe stretch ratio up to 250%automatic stretch film feedingFilm lifting guide rail: double chain structure, the lifting speed adjustableControl system: PLC control system, wrapping layers and times adjustableAutomatic height detection of the goodsAuto film feeding:                 pneumatic dr

Gram weight:100g/m2Moisture:7%Mechanical performance:Suitable for non-tear rolled edgeWrapping crimping distance:100mmFolding side width:100mm every sideTechnical information1. Chain conveyer, chain pitch P=63.5mm, V-slat width: B=50mm, slat length: B=250mm, Thickness: S=8 mm, Material 16 manganese.2. Slat are being made V type to transport paper rolls with a 170-degree angle.3. Slat conveyor weight capacity: 3000kg/m...4. Bearings in roller of conveyor chain for running flexible and being greased through the space of the chain roller. Not often and no pollution.5.

Product ParametersFrame material:carbon steel sheetSmall roller chain material:08B carbon steelRail material:steel rail.Sprocket material:steel matching standard sprocket (tooth surface quenching).Chain Tension:bearing housing tensionRoller material:60 carbon steel galvanized thickened roller,Conveyor line outer width/effective inner width:1450mm/1260mm (customized size according to cargo specifications)  The conveying mechanism can adopt different forms such as rollers, belts, chain plates, etc.