Paper Roll Elevator-manufacture,factory,supplier from China

No.ItemBrandOrigin1PLC & touch screenSiemensGermany2InverterSchneiderFrance3Proximity switchOmronJapan4Limit switchOmronJapan5Power switchSchneiderFrance6RelayOmronJapan7PhotoeyePanasonicJapan8Pneumatic partsAirtecRodless cylinder: SMCTaiwan, ChinaJapan9MotorChinese brandChinaPallet dimension: L1200mm * W1200mm * H1800mmVolt: 380Volts, 50Hz, 3 phaseTop sheet length: adjustable according to the pallet (normally 1200mm+2*300mm)Sheet delivery speed: 9.5m/minFilm feeding frame moving speed: 4.5m/min

Voltage220/380V 50/60HZ 3PWrapping Size(L*W mm)(500-1100)*(500-1200)Wrapping Height500-1800/2400Capacity20-40 Pallet/HourTurntable size2000mmTurntable Height400mmIntelligent Conveying and Packaging System Paper Roll Conveying and Packaging System in Papermaking Completion Section. Paper roll conveying and packaging system is mainly used for paper roll conveying and packaging in paper mills. Use special machinery and advanced control system to complete automatic and manual conveying, stopping, turning, weighing, code spraying, labeling, turning and packaging of paper rolls.

Capacity of tissue machine8rolls/HBearing capacity:Max. 10tons (including spool shaft)Working time:24Hours /7 daysPaper roll diameter:φ1000-3500mmPaper roll width:±3700mmMax. Width including spool shaft:±5800mmTravel distance:±2*200m straight + 2*15m cross directionTravel speed:Max. 40m/min (loaded)Max. 60m/min (unloaded)Paper roll conveyor system--V-type slat conveyor1. The V type is especially made for the paper roll.2. The v-slat conveyor is usually used in the paper roll packing and transporting system.3.

Capacity of tissue machine8rolls/HBearing capacity:Max. 10tons (including spool shaft)Working time:24Hours /7 daysPaper roll diameter:φ1000-3500mmPaper roll width:±3700mmMax. Width including spool shaft:±5800mmTravel distance:±2*200m straight + 2*15m cross directionTravel speed:Max. 40m/min (loaded)Max.

Capacity of tissue machine8rolls/HBearing capacity:Max. 10tons (including spool shaft)Working time:24Hours /7 daysPaper roll diameter:φ1000-3500mmPaper roll width:±3700mmMax. Width including spool shaft:±5800mmTravel distance:±2*200m straight + 2*15m cross directionTravel speed:Max. 40m/min (loaded)Max.

Gram weight:100g/m2Moisture:7%Mechanical performance:Suitable for non-tear rolled edgeWrapping crimping distance:100mmFolding side width:100mm every sideMain material of the frame: Q235-AThe surface of the 7 paper guide rollers is galvanized with a diameter of Ф100mm.4 sets of tension controller, using motor frequency control.4 sets of paper holder pneumatic clamping mechanism, including 8 cylinders.4 pneumatic control boxes and pneumatic control components used.Compressed air lines, fittings and accessories used inside the packaging machine.The gas point is connected to the gas point by the b

Capacity of tissue machine8rolls/HBearing capacity:Max. 10tons (including spool shaft)Working time:24Hours /7 daysPaper roll diameter:φ1000-3500mmPaper roll width:±3700mmMax. Width including spool shaft:±5800mmTravel distance:±2*200m straight + 2*15m cross directionTravel speed:Max. 40m/min (loaded)Max.

Gram weight:100g/m2Moisture:7%Mechanical performance:Suitable for non-tear rolled edgeWrapping crimping distance:100mmFolding side width:100mm every sideTechnical information1. Chain conveyer, chain pitch P=63.5mm, V-slat width: B=50mm, slat length: B=250mm, Thickness: S=8 mm, Material 16 manganese.2. Slat are being made V type to transport paper rolls with a 170-degree angle.3. Slat conveyor weight capacity: 3000kg/m...4. Bearings in roller of conveyor chain for running flexible and being greased through the space of the chain roller. Not often and no pollution.5.

V-slat conveyorChain pitch:P = 63.5 mmSlat width:B = 55 mmSlat length:L = 250 mmThickness:S = 8mm,  Stainless steel or Carbon steelLength of conveyorCustomizedNo. Of conveyorCustomizedSpeed of conveyors18m/min or customizedSlat bearing:HRB, ChinaGear motor:SEW, Germany or Chinese famous motorThe conveyor slat is made in V-Shaped, Angle: 170°.    --Loading capacity of slat conveyor: 3000 kg/m .--Chain rollers installed with bearing inside, No oil and No contamination on paper rolls.--Heavy duty steel structures, modular design.

ItemSpecificationsStrapping widthMax. 1200mmStrapping heightMax.

Chain pitchP = 63.5 mmSlat widthB = 55 mmSlat lengthL = 250 mmThicknessS = 8 mm  Stainless steel 304Turntable diameterDesign based on paper reel sizeAfter finishing stretch wrapping, the film tail will be cut and next film head is clamped automatically. Air blowing to wrap film head into pallet.Hot cutting wire to cut the film after wrapping, and then wiper arm brush against film tail.

ItemSpecificationArm performancePrecise sensitivity emergency brake system; Automatic arm  reset.Film carriage systemPre-stretch film carriage, stretch ratio up to 250% or 300%, automatic film feeding & cutting device, adjustable speed.Lifting columnChain structure, speed variable frequency adjustable.Control systemPLC programmable control; Wrapping layer adjustable;Automatic height sense.The design ideas and concepts of the equipment system and management system are advanced.

Material:               stretch filmWidth:                      500mmThickness:    17-35μmInner Core:               76.2mmOuter-Dia.:                         ≤260 mm Specification2.1 Strapping specification:Size of pallet: 1300mmx1300mmx2000mm2.2 Requirement for the placing of the pal

No.ItemBrandOrigin1PLC & touch screenSiemensGermany2InverterSchneiderFrance3Proximity switchOmronJapan4Limit switchOmronJapan5Power switchSchneiderFrance6RelayOmronJapan7PhotoeyePanasonicJapan8Pneumatic partsAirtecRodless cylinder: SMCTaiwan, ChinaJapan9MotorChinese brandChinaThe cease sorting deck is composed through the 12 unit.

Chain pitchP = 63.5 mmSlat widthB = 55 mmSlat lengthL = 250 mmThicknessS = 8 mm  Stainless steel 304Turntable diameterDesign based on paper reel sizeThe photoelectric switch is installed on the film carriage, automatic detect the height of the pallet 

Technical specificationsV-type slat conveyor Chain pitch: P = 63.5 mm Slat width: B = 55 mm Slat length: L = 250 mm Thickness: S = 8mm,  Stainless steel, or carbon steel Length of conveyor Customized No.

Material:  stretch filmWidth:      500mmThickness:     17-35μmInner Core:       76.2mmOuter-Dia.:      ≤260 mmOpen-door type pre-stretch film carriage, stretch ratio 250% (1m to 3.5m)Film carriage lifting driving: chain driving, good stability and high reliability Driving reducer: worm gear reducer; Motor power: 0.75kw, SEW

Technical specificationsV-type slat conveyor Chain pitch: P = 63.5 mm Slat width: B = 55 mm Slat length: L = 250 mm Thickness: S = 8mm,  Stainless steel, or carbon steel Length of conveyor Customized No.

Capacity of tissue machine8rolls/HWorking time:24Hours /7 daysPaper roll diameter:φ1000-3500mmPaper roll width:±3700mmMax. Width including spool shaft:±5800mmTravel distance:±2*200m straight + 2*15m cross directionSimple and reliable design, stable workingAutomatic feeding, welding, cutting strap, make a flat and beautiful weldSide Motor drive moves on the two parallel rails, which keeps right strap position.One automatic wear sword slot can cross the center of turntable.

 Chain pitch: P = 63.5 mm Slat width: B = 55 mm Slat length: L = 250 mm Thickness: S = 8mm, 16 Mn Steel Conveyor height 12000mm*5 sets+17500mm*1 set Conveyor height 800mm Speed of conveyors 18m/min (Can be adjusted or as required) Slat bearing,Gear motor Chinese brand Power 3kW+4kW (or as required)chain conveyer, chain pitch P=63.5mm,V-slat width:B=50mm,slat length:B=250mm,Thickness:S=8 mm,Material 16 manganese.2. Slat are being made V type to transport paper rolls with a 170-degree angle.3.

Rotating speed of the rotary arm:0-35rpm, variable frequency control motor drivingFunction of rotary arm:automatic brake system, automatic resetFilm carriage:pre-stretch film carriagethe stretch ratio up to 250%automatic stretch film feedingFilm lifting guide rail: double chain structure, the lifting speed adjustableControl system: PLC control system, wrapping layers and times adjustableAutomatic height detection of the goodsAuto film feeding:                 pneumatic driving, auto film feeding, aut

1. The main frame, four robust columns connected by a solid construction consisting ofHeavy square cartridge profile, fully sprayed in RAL colour and designed for the most stable suspension of the swivel arm;2. Swivel arm from heavy cartridge profile fitted with external cabling for vertical movement of the slide which the foil trolley is suspended from. This slide is suspended from a chain and powered by a transmission motor. Fitted with frequency control3. · Automatic height sensor of the pallet load through a photo cell which is also able toDetect dark loads;4.

Max load size(mm)1200 (L)×1200(W) ×2000(H)mmPacking efficiency0-60 loads / hourRotary arm speed0-25rpmPower supply4.0KW  380V 50HZ 3PhaseMax load capacity2000kgsWrapping requirementBottom wrapping up to 2/3 of pallet, top wrapping 15cm higher than the height of palletWorking ambianceIndoor, normal temperatureStop the finishing rolls coming from the rewinder and releaserolls to the V-type slat conveyor according in order.Change the gap conveying into the continuos conveying.

No.ItemBrandOrigin1PLC & touch screenSiemensGermany2InverterSchneiderFrance3Proximity switchOmronJapan4Limit switchOmronJapan5Power switchSchneiderFrance6RelayOmronJapan7PhotoeyePanasonicJapan8Pneumatic partsAirtecRodless cylinder: SMCTaiwan, ChinaJapan9MotorChinese brandChinaallet dimension: L1200mm * W1200mm * H1800mmVolt: 380Volts, 50Hz, 3 phaseTop sheet length: adjustable according to the pallet (normally 1200mm+2*300mm)Sheet delivery speed: 9.5m/minFilm feeding frame moving speed: 4.5m/minSheet cutting: knife blade, pneumatic drivenFilm roll width: Max.