Paper Conveyor Machine V-Salt Conveyor Paper Roll Conveying-manufacture,factory,supplier from China

 Chain pitch: P = 63.5 mm Slat width: B = 55 mm Slat length: L = 250 mm Thickness: S = 8mm, 16 Mn Steel Conveyor height 12000mm*5 sets+17500mm*1 set Conveyor height 800mm Speed of conveyors 18m/min (Can be adjusted or as required) Slat bearing,Gear motor Chinese brand Power 3kW+4kW (or as required)chain conveyer, chain pitch P=63.5mm,V-slat width:B=50mm,slat length:B=250mm,Thickness:S=8 mm,Material 16 manganese.2. Slat are being made V type to transport paper rolls with a 170-degree angle.3.

Gram weight:100g/m2Moisture:7%Mechanical performance:Suitable for non-tear rolled edgeWrapping crimping distance:100mmFolding side width:100mm every sideTechnical information1. Chain conveyer, chain pitch P=63.5mm, V-slat width: B=50mm, slat length: B=250mm, Thickness: S=8 mm, Material 16 manganese.2. Slat are being made V type to transport paper rolls with a 170-degree angle.3. Slat conveyor weight capacity: 3000kg/m...4. Bearings in roller of conveyor chain for running flexible and being greased through the space of the chain roller. Not often and no pollution.5.

Capacity of tissue machine8rolls/HBearing capacity:Max. 10tons (including spool shaft)Working time:24Hours /7 daysPaper roll diameter:φ1000-3500mmPaper roll width:±3700mmMax. Width including spool shaft:±5800mmTravel distance:±2*200m straight + 2*15m cross directionTravel speed:Max. 40m/min (loaded)Max. 60m/min (unloaded)Paper roll conveyor system--V-type slat conveyor1. The V type is especially made for the paper roll.2. The v-slat conveyor is usually used in the paper roll packing and transporting system.3.

Capacity of tissue machine8rolls/HBearing capacity:Max. 10tons (including spool shaft)Working time:24Hours /7 daysPaper roll diameter:φ1000-3500mmPaper roll width:±3700mmMax. Width including spool shaft:±5800mmTravel distance:±2*200m straight + 2*15m cross directionTravel speed:Max. 40m/min (loaded)Max.

V-slat conveyorChain pitch:P = 63.5 mmSlat width:B = 55 mmSlat length:L = 250 mmThickness:S = 8mm,  Stainless steel or Carbon steelLength of conveyorCustomizedNo. Of conveyorCustomizedSpeed of conveyors18m/min or customizedSlat bearing:HRB, ChinaGear motor:SEW, Germany or Chinese famous motorThe conveyor slat is made in V-Shaped, Angle: 170°.    --Loading capacity of slat conveyor: 3000 kg/m .--Chain rollers installed with bearing inside, No oil and No contamination on paper rolls.--Heavy duty steel structures, modular design.

Capacity of tissue machine8rolls/HBearing capacity:Max. 10tons (including spool shaft)Working time:24Hours /7 daysPaper roll diameter:φ1000-3500mmPaper roll width:±3700mmMax. Width including spool shaft:±5800mmTravel distance:±2*200m straight + 2*15m cross directionTravel speed:Max. 40m/min (loaded)Max.

Voltage220/380V 50/60HZ 3PWrapping Size(L*W mm)(500-1100)*(500-1200)Wrapping Height500-1800/2400Capacity20-40 Pallet/HourTurntable size2000mmTurntable Height400mmIntelligent Conveying and Packaging System Paper Roll Conveying and Packaging System in Papermaking Completion Section. Paper roll conveying and packaging system is mainly used for paper roll conveying and packaging in paper mills. Use special machinery and advanced control system to complete automatic and manual conveying, stopping, turning, weighing, code spraying, labeling, turning and packaging of paper rolls.

Technical specificationsV-type slat conveyor Chain pitch: P = 63.5 mm Slat width: B = 55 mm Slat length: L = 250 mm Thickness: S = 8mm,  Stainless steel, or carbon steel Length of conveyor Customized No.

Technical specificationsV-type slat conveyor Chain pitch: P = 63.5 mm Slat width: B = 55 mm Slat length: L = 250 mm Thickness: S = 8mm,  Stainless steel, or carbon steel Length of conveyor Customized No.

Technical specificationsV-type slat conveyor Chain pitch: P = 63.5 mm Slat width: B = 55 mm Slat length: L = 250 mm Thickness: S = 8mm,  Stainless steel, or carbon steel Length of conveyor Customized No.

Max load size(mm)1200 (L)×1200(W) ×2000(H)mmPacking efficiency0-60 loads / hourRotary arm speed0-25rpmPower supply4.0KW  380V 50HZ 3PhaseMax load capacity2000kgsWrapping requirementBottom wrapping up to 2/3 of pallet, top wrapping 15cm higher than the height of palletWorking ambianceIndoor, normal temperatureStop the finishing rolls coming from the rewinder and releaserolls to the V-type slat conveyor according in order.Change the gap conveying into the continuos conveying.

Product originShandong,ChinaSizeCustomizedDelivery time30daysSupply capacity1000sets/monthAuto Module Conveyor System is high efficient downstream and processing system for modern corrugated cardboard and carton box factory. Through the layout of the whole plant, a reasonable plan is designed to realize automatic cardboard conveying and reduce manpower and material resources

Capacity of tissue machine8rolls/HBearing capacity:Max. 10tons (including spool shaft)Working time:24Hours /7 daysPaper roll diameter:φ1000-3500mmPaper roll width:±3700mmMax. Width including spool shaft:±5800mmTravel distance:±2*200m straight + 2*15m cross directionTravel speed:Max. 40m/min (loaded)Max.

Chain pitchP = 63.5 mmSlat widthB = 55 mmSlat lengthL = 250 mmThicknessS = 8 mm  Stainless steel 304Turntable diameterDesign based on paper reel sizeThe photoelectric switch is installed on the film carriage, automatic detect the height of the pallet 

Gram weight:100g/m2Moisture:7%Mechanical performance:Suitable for non-tear rolled edgeWrapping crimping distance:100mmFolding side width:100mm every sideMain material of the frame: Q235-AThe surface of the 7 paper guide rollers is galvanized with a diameter of Ф100mm.4 sets of tension controller, using motor frequency control.4 sets of paper holder pneumatic clamping mechanism, including 8 cylinders.4 pneumatic control boxes and pneumatic control components used.Compressed air lines, fittings and accessories used inside the packaging machine.The gas point is connected to the gas point by the b

ItemSpecificationFilm carriageDriven pre-stretch carriage, move up and down on side of the towerTowerDouble chain design. Lifting speed adjustableControl systemPLCRemarks: Some parts of the machine can be exchanged according to customer requirements.Option I: Standard low profile ramp.Option II: Weight scaleKickerKick out the rolls to the required position or equipments.

1. The main frame, four robust columns connected by a solid construction consisting ofHeavy square cartridge profile, fully sprayed in RAL colour and designed for the most stable suspension of the swivel arm;2. Swivel arm from heavy cartridge profile fitted with external cabling for vertical movement of the slide which the foil trolley is suspended from. This slide is suspended from a chain and powered by a transmission motor. Fitted with frequency control3. · Automatic height sensor of the pallet load through a photo cell which is also able toDetect dark loads;4.

No.ItemBrandOrigin1PLC & touch screenSiemensGermany2InverterSchneiderFrance3Proximity switchOmronJapan4Limit switchOmronJapan5Power switchSchneiderFrance6RelayOmronJapan7PhotoeyePanasonicJapan8Pneumatic partsAirtecRodless cylinder: SMCTaiwan, ChinaJapan9MotorChinese brandChinaThe cease sorting deck is composed through the 12 unit.

Product ParametersFrame material:carbon steel sheetSmall roller chain material:08B carbon steelRail material:steel rail.Sprocket material:steel matching standard sprocket (tooth surface quenching).Chain Tension:bearing housing tensionRoller material:60 carbon steel galvanized thickened roller,Conveyor line outer width/effective inner width:1450mm/1260mm (customized size according to cargo specifications)  The conveying mechanism can adopt different forms such as rollers, belts, chain plates, etc.

ItemData Rotating ring inner diameter1800mm Package dimension (W*H)100 mm*1200 mm Packing length>1200 mm Rotating ring speed20-30rpm Conveying speed5-8 m/min Packing material width 200 mm- 500 mm Power 2.2 Kw Machine Weight 1500 kg Machine shape size 2600 mm * 1650 mm *2600 mmFeatures: Siemens PLC electric control system, touch screen panelRing rotating speed controlled by the inverterIn-feed & out-feed conveyor speed controlled by the inverterStart and finish cycles are controlled by photocellsAuto film cutting and c

Chain pitchP = 63.5 mmSlat widthB = 55 mmSlat lengthL = 250 mmThicknessS = 8 mm  Stainless steel 304Turntable diameterDesign based on paper reel sizeAfter finishing stretch wrapping, the film tail will be cut and next film head is clamped automatically. Air blowing to wrap film head into pallet.Hot cutting wire to cut the film after wrapping, and then wiper arm brush against film tail.

ItemSpecificationsStrapping widthMax. 1200mmStrapping heightMax.

No.ItemBrandOrigin1PLC & touch screenSiemensGermany2InverterSchneiderFrance3Proximity switchOmronJapan4Limit switchOmronJapan5Power switchSchneiderFrance6RelayOmronJapan7PhotoeyePanasonicJapan8Pneumatic partsAirtecRodless cylinder: SMCTaiwan, ChinaJapan9MotorChinese brandChinaPallet dimension: L1200mm * W1200mm * H1800mmVolt: 380Volts, 50Hz, 3 phaseTop sheet length: adjustable according to the pallet (normally 1200mm+2*300mm)Sheet delivery speed: 9.5m/minFilm feeding frame moving speed: 4.5m/min

Material:  stretch filmWidth:      500mmThickness:     17-35μmInner Core:       76.2mmOuter-Dia.:      ≤260 mmOpen-door type pre-stretch film carriage, stretch ratio 250% (1m to 3.5m)Film carriage lifting driving: chain driving, good stability and high reliability Driving reducer: worm gear reducer; Motor power: 0.75kw, SEW