Kraft Paper Wrapping-manufacture,factory,supplier from China

ItemSpecificationWrapping specifications(500-1300)mm*(500-1200)mm.Packing height2400mmPackaging efficiency30-60 loads/H available.

Gram weight:100g/m2Moisture:7%Mechanical performance:Suitable for non-tear rolled edgeWrapping crimping distance:100mmFolding side width:100mm every sideMain material of the frame: Q235-AThe surface of the 7 paper guide rollers is galvanized with a diameter of Ф100mm.4 sets of tension controller, using motor frequency control.4 sets of paper holder pneumatic clamping mechanism, including 8 cylinders.4 pneumatic control boxes and pneumatic control components used.Compressed air lines, fittings and accessories used inside the packaging machine.The gas point is connected to the gas point by the b

Chain pitchP = 63.5 mmSlat widthB = 55 mmSlat lengthL = 250 mmThicknessS = 8 mm  Stainless steel 304Turntable diameterDesign based on paper reel sizeAfter finishing stretch wrapping, the film tail will be cut and next film head is clamped automatically. Air blowing to wrap film head into pallet.Hot cutting wire to cut the film after wrapping, and then wiper arm brush against film tail.

Voltage220/380V 50/60HZ 3PWrapping Size(L*W mm)(500-1100)*(500-1200)Wrapping Height500-1800/2400Capacity20-40 Pallet/HourTurntable size2000mmTurntable Height400mmIntelligent Conveying and Packaging System Paper Roll Conveying and Packaging System in Papermaking Completion Section. Paper roll conveying and packaging system is mainly used for paper roll conveying and packaging in paper mills. Use special machinery and advanced control system to complete automatic and manual conveying, stopping, turning, weighing, code spraying, labeling, turning and packaging of paper rolls.

Capacity of tissue machine8rolls/HBearing capacity:Max. 10tons (including spool shaft)Working time:24Hours /7 daysPaper roll diameter:φ1000-3500mmPaper roll width:±3700mmMax. Width including spool shaft:±5800mmTravel distance:±2*200m straight + 2*15m cross directionTravel speed:Max. 40m/min (loaded)Max. 60m/min (unloaded)Paper roll conveyor system--V-type slat conveyor1. The V type is especially made for the paper roll.2. The v-slat conveyor is usually used in the paper roll packing and transporting system.3.

Chain pitchP = 63.5 mmSlat widthB = 55 mmSlat lengthL = 250 mmThicknessS = 8 mm  Stainless steel 304Turntable diameterDesign based on paper reel sizeThe photoelectric switch is installed on the film carriage, automatic detect the height of the pallet 

                                          ItemSpecificationWrapping specifications(500-1300)mm*(500-1200)mm.Packing height2400mmPackaging efficiency30-60 loads/H available.

 Chain pitch: P = 63.5 mm Slat width: B = 55 mm Slat length: L = 250 mm Thickness: S = 8mm, 16 Mn Steel Conveyor height 12000mm*5 sets+17500mm*1 set Conveyor height 800mm Speed of conveyors 18m/min (Can be adjusted or as required) Slat bearing,Gear motor Chinese brand Power 3kW+4kW (or as required)chain conveyer, chain pitch P=63.5mm,V-slat width:B=50mm,slat length:B=250mm,Thickness:S=8 mm,Material 16 manganese.2. Slat are being made V type to transport paper rolls with a 170-degree angle.3.

Wrapping speed:30-60pallets/hRotating speed of the rotary arm:0-35rpm, variable frequency control motor drivingFunction of rotary arm:automatic brake system, automatic resetFilm carriage:pre-stretch film carriagethe stretch ratio up to 250%automatic stretch film feedingFilm lifting guide rail: double chain structure, the lifting speed adjustableControl system: PLC control system, wrapping layers and times adjustableAutomatic height detection of the goodsAuto film feeding:                 pneumatic dr

Gram weight:100g/m2Moisture:7%Mechanical performance:Suitable for non-tear rolled edgeWrapping crimping distance:100mmFolding side width:100mm every sideTechnical information1. Chain conveyer, chain pitch P=63.5mm, V-slat width: B=50mm, slat length: B=250mm, Thickness: S=8 mm, Material 16 manganese.2. Slat are being made V type to transport paper rolls with a 170-degree angle.3. Slat conveyor weight capacity: 3000kg/m...4. Bearings in roller of conveyor chain for running flexible and being greased through the space of the chain roller. Not often and no pollution.5.

V-slat conveyorChain pitch:P = 63.5 mmSlat width:B = 55 mmSlat length:L = 250 mmThickness:S = 8mm,  Stainless steel or Carbon steelLength of conveyorCustomizedNo. Of conveyorCustomizedSpeed of conveyors18m/min or customizedSlat bearing:HRB, ChinaGear motor:SEW, Germany or Chinese famous motorThe conveyor slat is made in V-Shaped, Angle: 170°.    --Loading capacity of slat conveyor: 3000 kg/m .--Chain rollers installed with bearing inside, No oil and No contamination on paper rolls.--Heavy duty steel structures, modular design.

Package length≤2200mmPackage diameter400mmCross section of goods(W×H)550X550mmPackaging speed4-6m/minPackaging efficiency40-60s/pieceOperation voltage380V.50HzMain engine power3.5KWPackaging material materialStretch film, anti rust composite paper, woven tape, aluminum plastic film, etcPacking material inner diameterΦ38,Φ50,Φ75Outer diameter of packaging materialsΦ150-Φ600Packaging material width50-120mmSwivel travelThe lifting stroke is 250mm; Horizontal movement 400mmAutomatic winding mechanism /ZSPneumatic controlPneumatic roof pressure /CSOptionalPneumatic roller protector /HGOptionalConve

Max load size(mm)1200 (L)×1200(W) ×2000(H)mmPacking efficiency0-60 loads / hourRotary arm speed0-25rpmPower supply4.0KW  380V 50HZ 3PhaseMax load capacity2000kgsWrapping requirementBottom wrapping up to 2/3 of pallet, top wrapping 15cm higher than the height of palletWorking ambianceIndoor, normal temperatureStop the finishing rolls coming from the rewinder and releaserolls to the V-type slat conveyor according in order.Change the gap conveying into the continuos conveying.

ItemSpecificationArm performancePrecise sensitivity emergency brake system; Automatic arm  reset.Film carriage systemPre-stretch film carriage, stretch ratio up to 250% or 300%, automatic film feeding & cutting device, adjustable speed.Lifting columnChain structure, speed variable frequency adjustable.Control systemPLC programmable control; Wrapping layer adjustable;Automatic height sense.The design ideas and concepts of the equipment system and management system are advanced.

SpecificationProduct name Pallet stretching wrapping machineModel T1650FL pallet stretching wrapping machineWrapping size 500-1200mm(L) x 500-1200mm(W)Wrapping height Max.2400mm (1800mm/2800mm available)Package 1) Inner: Iron frame 2) Outer: wooden box P.S: Customized packages are also welcomeTurntable size Dia:1650mm      Height:78mmTurntable bearing Max.

No.ItemBrandOrigin1PLC & touch screenSiemensGermany2InverterSchneiderFrance3Proximity switchOmronJapan4Limit switchOmronJapan5Power switchSchneiderFrance6RelayOmronJapan7PhotoeyePanasonicJapan8Pneumatic partsAirtecRodless cylinder: SMCTaiwan, ChinaJapan9MotorChinese brandChinaThe cease sorting deck is composed through the 12 unit.

Material:  stretch filmWidth:      500mmThickness:     17-35μmInner Core:       76.2mmOuter-Dia.:      ≤260 mmOpen-door type pre-stretch film carriage, stretch ratio 250% (1m to 3.5m)Film carriage lifting driving: chain driving, good stability and high reliability Driving reducer: worm gear reducer; Motor power: 0.75kw, SEW

Rotating speed of the rotary arm:0-35rpm, variable frequency control motor drivingFunction of rotary arm:automatic brake system, automatic resetFilm carriage:pre-stretch film carriagethe stretch ratio up to 250%automatic stretch film feedingFilm lifting guide rail: double chain structure, the lifting speed adjustableControl system: PLC control system, wrapping layers and times adjustableAutomatic height detection of the goodsAuto film feeding:                 pneumatic driving, auto film feeding, aut

ItemSpecificationTurntable speed0-12RPM (adjustable, soft start & stop)BearingMax. 2000kgsStretch ratioUp to 250%TowerDouble chain design. Lifting speed adjustableControl systemPLCRemarks: Some parts of the machine can be exchanged according to customer requirements.Option I: Standard low profile ramp.Option II: Weight scaleThe wrapping recognise dust-proof, moisture-proof, much less packaging cost, enhance packing efficiency, and decrease product loss in transportation.

ItemsSpecificationsRoll Diameter600-3000mmRoll width500-1800mmRoll WeightMax. 3000kgsPacking efficiency20-30 rolls/hTurntable diameter2200mmTurntable speed3-12rpmTurntable height490mm/710mmMachine weight1180kgPower supply2.2kw, 220V, 1P, 50 Hz Reel Wrapping Machine is the cylindrical winding packaging machine for cylindrical objects to carry out axial packaging to achieve the overall package. The wrapper wraps reel in 360 degree and can be designed with top platen device.

SpecificationProduct name Advanced Intelligent Online Fully Automatic pallet stretch wrapping machineModel T1800FZ-PL stretch wrapping machineWrapping size 500-1100mm(L) x 500-1100mm(W)Wrapping height Max.2400mm (1800mm/2800mm available)Package 1) Inner: Iron frame 2) Outer: wooden box P.S: Customized packages are also welcomeTurntable size Dia:1800mm      Height: from 490mmTurntable bearing Max.

ItemSpecificationwrapping size(mm)500-1200mm (L)×500-1100(W)Wrapping height (mm)2200mmPacking efficiency20-40 loads / hourTurntable turning speed0-15rpm (Adjustable, soft start&stop)Roller conveying speed:20mpm adjustableTurntable diameter1800mmHeight of turntableTo be designed based on customer requirementsPower supply2.4KW   380V 50HZ 3PhaseMax.

Wrapping specifications(400~1200mm) x (180~400mm) x (300~600mm)Rotating speed20RPM (turntable transducer adjust, steady stop and start)Film carriage systempre-stretch film carriageMachine weight200kgMachine dimension1595mm×600mm×1194mmStrong steel frame to keep film carriage running steady during wrapping progress.Height: to be designed according to the packing height 2,000-2800mm.

Max load size(mm)1200 (L)×1200(W) ×2000(H)mmPacking efficiency0-60 loads / hourRotary arm speed0-25rpmPower supply4.0KW  380V 50HZ 3PhaseMax load capacity2000kgsWrapping requirementBottom wrapping up to 2/3 of pallet, top wrapping 15cm higher than the height of palletWorking ambianceIndoor, normal temperatureUsed for the maintainer to climb to the top to do the maintenance.The safety guard fence can effectively protect the personal safety.   The maintainer can stand on the maintenance platform to execute their work.